TI 公司的TPS84621RUQ是容易使用的綜合電源解決方案,集成了6A的DC/DC轉換器和功率MOSFET,電感和無源元件.總體電源解決方案僅有三個外接元件,不需要回路補償和磁性部分處理.效率大于90%,9×15×2.8 mm BQFN封裝,熱阻僅為13°C/W,輸入電壓可低至1.6V,可調開關頻率250 kHz 到780 kHz,在85度C環境溫度時可提供6A的額定電流,可用在寬帶和通信基礎設備,自動化測試和醫療設備,DSP和FPGA點負載電源,高密度分布電源系統,緊湊的PCI / PCI Express / PXI Express.本文介紹了TPS84621主要特性,功能框圖,典型應用電路以及TPS84621EVM-692 6A評估模塊主要特性和指標,電路圖,材料清單和PCB布局圖.
The TPS84621RUQ is an easy-to-use integrated power solution that combines a 6-A DC/DC converter with power MOSFETs, an inductor, and passives into a low profile, BQFN package. This total power solution allows as few as 3 external components and eliminates the loop compensation and magnetics part selection process.
The 9×15×2.8 mm BQFN package is easy to solder onto a printed circuit board and allows a compact point-of-load design with greater than 90% efficiency and excellent power dissipation with a thermal impedance of 13°C/W junction to ambient. The device delivers the full 6-A rated output current at 85°C ambient temperature without airflow.
The TPS84621 offers the flexibility and the feature-set of a discrete point-of-load design and is ideal for powering performance DSPs and FPGAs.
TPS84621主要特性:
Complete Integrated Power Solution Allows
Small Footprint, Low-Profile Design
Efficiencies Up To 96%
Wide-Output Voltage Adjust
0.6 V to 5.5 V, with 1% Reference Accuracy
Optional Split Power Rail allows
input voltage down to 1.6 V
Adjustable Switching Frequency
(250 kHz to 780 kHz)
Synchronizes to an External Clock
Adjustable Slow-Start
Output Voltage Sequencing / Tracking
Power Good Output
Programmable Undervoltage Lockout (UVLO)
Output Overcurrent Protection (Hiccup Mode)
Over Temperature Protection
Pre-bias Output Start-up
Operating Temperature Range: –40°C to 85°C
Enhanced Thermal Performance: 13°C/W
Meets EN55022 Class B Emissions
TPS84621應用:
• Broadband and Communications Infrastructure
• Automated Test and Medical Equipment
• Compact PCI / PCI Express / PXI Express
• DSP and FPGA Point of Load Applications
• High Density Distributed Power Systems
圖1.TPS84621功能方框圖
圖2.TPS84621典型應用電路:PVIN=VIN=4.5V-14.5V, VOUT=1.8V
圖3.TPS84621典型應用電路: PVIN = VIN = 4.5 V-14.5 V, VOUT = 3.3 V
圖4.TPS84621典型應用電路: PVIN=3.3 V, VIN = 4.5 V-4.5 V, VOUT =1.2 V
TPS84621EVM-692 6A評估模塊
The TPS84621EVM-692 is a fully assembled and tested circuit for evaluating the TPS84621 4.5-V to 14.5-V Input, 6-A Synchronous Buck, Integrated Power Solution. The TPS84621EVM-692 incorporates a DC/DC converter with output voltage and frequency that are adjustable using jumpers.
This evaluation module is designed to demonstrate the small printed-circuit-board areas that may be achieved when designing with the TPS84320/620/621 regulator. The TPS84x2xEVM-692 default output voltage is 3.3 V at a 630-kHz switching frequency. The high-side and low-side MOSFETs are incorporated inside the TPS84320/620/621 package along with the gate drive circuitry. The low drain-to-source on-resistance of the MOSFET allows the TPS84320/620/621 to achieve high efficiencies and helps keep the junction temperature low at high output currents. The compensation components are internal to the TPS84320/620/621, and external resistors and jumpers allow for adjustable output voltage and frequency adjustment. Additionally, the TPS84320/620/621 provides adjustable slow start, tracking, and undervoltage lockout inputs. The absolute maximum input voltage is 15 V for the TPS84x2xEVM-692.
TPS84621EVM-692主要特性:
Wide-Output Voltage Adjust (0.6 V to 5.5 V), with 1% Reference Accuracy
Optional Split Power Rail Allows Input Voltage Down to 1.6 V
Adjustable Switching Frequency (250 kHz to 780 kHz)
Synchronizes to an External Clock
Adjustable Slow-Start
Output Voltage Sequencing / Tracking
Power Good Output
Programmable Undervoltage Lockout (UVLO)
Output Overcurrent Protection
Over Temperature Protection
Pre-bias Output Start-up
TPS84621EVM-692電性能指標:
圖5.TPS84x2xEVM-692電路圖
TPS84621EVM-692材料清單:
圖6.TPS84x2xEVM-692 PCB布局圖(頂層)
詳情請見:
http://www.ti.com/lit/ds/symlink/tps84621.pdf
和
http://www.ti.com/lit/ug/sluu633/sluu633.pdf
