ADI公司的DAuM5010是一款雙通道內部集成數字隔離DC-DC轉換控制器。基于ADI公司先進iCoupler® 技術，數字隔離DC-DC轉換控制器提供隔離調整電壓范圍：3.15-5.25V，輸入電壓的范圍可以從供給略低于所需的輸出來顯著提高。本文介紹了DAuM5010芯片的主要特性、方框圖、應用方向。評估板EVAL-ADuM5010EBZ的主要特性、電路圖、材料清單和PCB元件布局圖。
The ADuM50101 is an integrated, isolated dc-to-dc converter. Based on the Analog Devices, Inc., iCoupler® technology, the dc-to-dc converter provides regulated, isolated power, adjustable between 3.15 V and 5.25 V. Input supply voltages can range from slightly below the required output to significantly higher. Popular combinations and their associated power levels are shown in Table 1 .
The iCoupler chip-scale transformer technology is used for isolated logic signals and for the magnetic components of the dc-to-dc converter. The result is a small form factor, total isolation solution.
isoPower uses high frequency switching elements to transfer power through its transformer. Special care must be taken during printed circuit board (PCB) layout to meet emissions standards. See the AN-0971 Application Note for board layout recommendations.
DAuM5010主要特性：
isoPower integrated, isolated dc-to-dc converter
Regulated 3.15 V to 5.25 V output
Up to 150 mW output power
20-lead SSOP package with 5.3 mm creepage
High temperature operation: 105°C
High common-mode transient immunity: >25 kV/μs
Safety and regulatory approvals
UL recognition (pending)
2500 V rms for 1 minute per UL 1577
CSA Component Acceptance Notice #5A (pending)
VDE certificate of conformity (pending)
DIN V VDE V 0884-10 (VDE V 0884-10):2006-12
VIORM = 560 V peak
DAuM5010應用：
Power supply start-up bias and gate drives
Isolated sensor interfaces
Industrial PLCs
圖1. DAuM5010方框圖
EVAL-ADuM5010EBZ主要特性：
isoPower integrated, isolated dc-to-dc converter
Regulated 3.15 V to 5.25 V output
Up to 150 mW output power
20-lead SSOP package with 5.3 mm creepage
High temperature operation: 105°C
High common-mode transient immunity: >25 kV/μs
EVAL-ADuM5010EBZ電路圖：
圖2. EVAL-ADuM5010EBZ電路圖
EVAL-ADuM5010EBZ材料清單：
PCB元件布局圖：
