中圖分類號： TP391.9 文獻標識碼： A DOI：10.16157/j.issn.0258-7998.211291 中文引用格式： 王亮，郭海濤，齊宏斌，等. 基于VR+AR技術的電纜接頭制作虛擬培訓系統(tǒng)設計[J].電子技術應用，2022，48(2)：60-64. 英文引用格式： Wang Liang，Guo Haitao，Qi Hongbin，et al. Virtual training system design based on VR+AR technology for cable connector fabrication[J]. Application of Electronic Technique，2022，48(2)：60-64.
Virtual training system design based on VR+AR technology for cable connector fabrication
Wang Liang，Guo Haitao，Qi Hongbin，Pei Lei，Yang Hanshuo
Shaanxi Power Company Baoji Power Supply Company，Baoji 721004，China
Abstract： In this paper, a virtual training system based on VR and AR technology for cable connector fabrication is presented. Firstly, the cable connector fabrication circumstance is reconstructed through virtual reality and augment reality technology, and the cable connector components and primary tools are added into the circumstance for the trainees to use. Secondly, the hand gestures of trainees are caputured and recognized by means of deep learning method and compared with the stardand gestures to check the normalization of these gestures. So the trainees can be assessed during the whole course of training process and obtain a better feedback results. The whole system consists of four parts: theoretical study, cable connector fabrication simulation, troubleshooting and assessment. Because the electric porwe operation scenes are highly reconstructed in the simulation system, it can bring a safe environment without a litttle danger for training person so that the risk is lowered and training efficiency is boosted. Moreover, the system can help to improve the standardization of operation for all the cable connector fabrication people.
Key words : electric power training；cable connector fabrication；virtual training；virtual reality(VR)；augmented reality(AR)
